Ultrasonic atomizer from the power cord, shell, circuit boards, epoxy resin, spring, seals, atomized film, pressure ring, water switch and other components. Which atomized film as an important part of the ultrasonic atomizer, with a certain life, when the atomization of the work of up to 5000 hours, is the need for atomization film replacement process, which for less contact with the ultrasonic atomizer customers , To the atomizer to replace the atomization film sometimes still have some difficulty, here will tell you easy and quick to solve the problem of ultrasonic atomizer for atomization.

First of all, the ultrasonic atomizer running time accumulated to 3000 ~ 5000 hours later, it should be timely cleaning or replacement of the atomization film. Replacement before the need to prepare a piece of soft cloth or cotton swab, here special emphasis on cleaning the atomization of the film when not with any cleaning agents, do not use fingers or other hard objects, such as wiping atomized film, so as not to damage. After cleaning, the atomization of the atomizer is still small or no fog, please replace the new atomized film. Procedure: Remove the power supply and remove the atomizer from the container. Insert the key with the key and twist the ring in the counterclockwise direction. Remove the old atomization film, put on a new atomization film; pay attention to the front and back of the atomized film, re-installed without black bad side up. Before installing the components, make sure that the atomized sheet is completely dry. This completes the replacement of the atomization of the problem.